406-283-1106 • 406-396-6443
Bulldog Navigation

Bulldog Automotive Dowel Pin Puller for Clutches and Engine Blocks


This automotive dowel pin puller is capable of pulling dowel pins from clutches and engine blocks in less than 5 seconds! Pulling a hard pressed steel pin out of its mounting plate may take as much as a 3,000 pound force, which is not as easy as simply pulling the lever. This automotive dowel pin puller tool makes use of twisting the pin as well as pulling to remove it.


This dowel pin pulling tool is made with an 8mm collet, but includes one 6mm insert & one .250 insert. The puller with inserts will pull most pins on flywheels and engine blocks with dowels 8mm and smaller. Extra inserts are available by contacting us.
The 10mm tool and .375″ tools are dedicated sizes per tool and do not include inserts and no inserts are available.

The lever on this tool is solid steel rod, not tubing to ensure a lifetime of use and pull the toughest dowel pins.

Dictated by the footprint of the tool, there needs to be a flat surface of 1-1/2 inches away from the center of the pin in front for leverage. Additionally, there needs to be 1 inch clear area from center in each direction all directions. There doesn’t have to be any surface behind the pin as long as there are no obstructions to impede extraction.

Additional information

Weight 96 oz
Dimensions 25 × 9 × 7 in
Collet Size

8mm (with 6mm and .25" inserts), 10mm (no inserts), .375" (no inserts)

Handle Length

20.5 Inches

Puller Height

6.5 Inches


There are no reviews yet.

Be the first to review “Bulldog Automotive Dowel Pin Puller for Clutches and Engine Blocks”

Your email address will not be published. Required fields are marked *